NFSCars Forums

NFSCars Forums (http://www.nfscars.net/forum/index.php)
-   Request Forums (http://www.nfscars.net/forum/forumdisplay.php?f=82)
-   -   Request Thread - Tracks and Cars - Make Them Here! (http://www.nfscars.net/forum/showthread.php?t=10602)

TwIzTiD 07-17-2004 06:26 PM

Request Thread - Tracks and Cars - Make Them Here!
 
Follow up on this last topic:
http://www.nfscars.net/phpbb/viewtopic.php?t=3405

GM Lover 07-17-2004 06:31 PM

Requests - Tracks and Cars - Make Them Here! (Part 3)
 
OK one more time..... can someone PLEASE make a 2004 Pontiac GTO for NFS3 or 6??? Thanx

tubbed 'n subbed 07-19-2004 05:33 AM

i started a pontaic gto notlong a go so ill try to finsh it :super:

Rally Master 07-23-2004 08:13 AM

you can always convert this
http://www.nfscars.net/car.php?ID=5431

Mad Dog Turahk 07-23-2004 06:09 PM

Hi everyone, I would like to make a car request for NFS 3. It is for a low poly Ferrari Modena (GT-X preferred) or a low-poly Hyundai Tiburon with these colors/pictures:

Colors: Metallic dark blue/Metallic dark red/metallic silver.

If you're doing the Modena, I would like this picture on the hood and this picture on the sides.

If it's the Tiburon, I would like lightning bolts and this image on the sides and this image on the hood.

Please contact me on NFS_8472@hotmail.com or nfs-speedster@home.nl if you are interested in doing this (these) request(s).

Thanks in advance!!!

MDT

cHeMhEaD_1 07-23-2004 06:18 PM

I'd still like to request a NASCAR or IRL-type speedway for NFS3 (The converted Proving Grounds, while good and an oval, still not a typical oval). Either that or a track like from Gran Turismo 3 (Like Tokyo R246, Grand Valley Speedway, or Special Stage Route 11).

Turbojett 07-28-2004 10:22 PM

this one's for Jay and/or DanR.

could you convert DanR's C6 (NFS6) to NFS4?
thanks.

Viper 07-28-2004 11:01 PM

Quote:

Originally Posted by Turbojett
this one's for Jay and/or DanR.

could you convert DanR's C6 (NFS6) to NFS4?
thanks.

You need to ask DanR' first , then you can ask me later.

.:360_Spyder:. 07-30-2004 09:44 AM

My PC burned, buying a new one - Please help!
 
If any1 has sum extra time on their hands wud u by any chance mind converting sum downloadable nfs4 cars to nfs6 for me plz. hopefully this isnt much work for any1 :poke: :mrgreen: .
If any1 doesnt mind, can u convert these cars from nfs4 to nfs6 for me...

http://www.nfscars.net/car.php?ID=3778 - Enzo (by:KV12supercharged)
http://www.nfscars.net/car.php?ID=4325 - Mazda rx-7 (by:Sparkle)
http://www.nfscars.net/car.php?ID=3504 - Mitsubishi blitz (by:Fivespeed)
http://www.nfscars.net/car.php?ID=2303 - Mitsubishi fnf (by:Fivespeed)
http://www.nfscars.net/car.php?ID=3798 - Subaru wrx (by:DG-R)
http://www.nfscars.net/car.php?ID=2688 - Toyota fnf (Donnie Briscoe)

ummm... i guess thats it for now, :mrgreen: , thanx ahead of time if u convert them n im not here :super: .

TwIzTiD 07-30-2004 10:23 PM

I think you should browse the NFS6 cars... 3(EDIT: 2) of them are converted. :rolleyes:

EDIT: You should have Specified with Enzo..

Sweek 07-31-2004 07:02 AM

Can someone please make a Noble M12 for NFS4? It's an awesome car and I can't believe no one has thought of making one yet.

.:360_Spyder:. 07-31-2004 10:05 AM

Official August Desktops
 
Quote:

Originally Posted by TwIzTiD
I think you should browse the NFS6 cars... 3(EDIT: 2) of them are converted. :rolleyes:

EDIT: You should have Specified with Enzo..

not 2 b rude or anything, but did u clik on the link to the enzo, its different, that one dusnt have a top, n its called the ferrari enzo spyder concept, its just that i cudnt fit the whole name there becuz i needed each link to the cars to be only on one line each. ok, ok i c that a cuple of cars are already in the nfs6 cars which r the zonda n koenigsegg, ill take them out, thanx. :) For the subaru i alredy kno there is 1 in the nfs6 cars section, but the one for nfs4 looks a whole lot better n i wud lyk to have that one converted, and same goes for the supra, the eclipses, n the rx-7

modifiersrule 07-31-2004 04:27 PM

i accidentay posted this in wrong area so here goesl
ANYONE WHOS GOOD AT SCRATCH-MADE READ THIS
please, please, please, please, please, please, please, please, please, please, please, please scratch make a miata COUPE
yup,its for sale, but sadly, only overseas. WAAAAAAAA!
if anyone (especialy people who make realistic looks AND performance) could do this, i'd worship them........
look at the pics so u have an idea of what to do(i wish i had 4 shots: front left rear right

Beaten The Odds 08-01-2004 10:51 AM

this is just my opinion, but i think we should make a car for all the great modellers we should make like a whole 3d car inside out, and maybe even high poly..... and we should use the best parts from the best modellers, and combine them to make one great car!

TwIzTiD 08-01-2004 01:46 PM

Quote:

Originally Posted by .:360-Spyder:.
not 2 b rude or anything, but did u clik on the link to the enzo, its different, that one dusnt have a top, n its called the ferrari enzo spyder concept, its just that i cudnt fit the whole name there becuz i needed each link to the cars to be only on one line each. ok, ok i c that a cuple of cars are already in the nfs6 cars which r the zonda n koenigsegg, ill take them out, thanx. :) For the subaru i alredy kno there is 1 in the nfs6 cars section, but the one for nfs4 looks a whole lot better n i wud lyk to have that one converted, and same goes for the supra, the eclipses, n the rx-7

Seemingly, yes, I did click on it. That is why I also said you should have specified which Enzo you were talking about. But anyways, Sorry for the mis-understanding.

.:360_Spyder:. 08-01-2004 02:47 PM

Quote:

Originally Posted by TwIzTiD
Quote:

Originally Posted by .:360-Spyder:.
not 2 b rude or anything, but did u clik on the link to the enzo, its different, that one dusnt have a top, n its called the ferrari enzo spyder concept, its just that i cudnt fit the whole name there becuz i needed each link to the cars to be only on one line each. ok, ok i c that a cuple of cars are already in the nfs6 cars which r the zonda n koenigsegg, ill take them out, thanx. :) For the subaru i alredy kno there is 1 in the nfs6 cars section, but the one for nfs4 looks a whole lot better n i wud lyk to have that one converted, and same goes for the supra, the eclipses, n the rx-7

Seemingly, yes, I did click on it. That is why I also said you should have specified which Enzo you were talking about. But anyways, Sorry for the mis-understanding.

well ok :) . umm... so..., heh, when is sum1 gonna convert the cars? umm... heh :mrgreen:

Red_Dragon 08-01-2004 04:06 PM

can someone plz canvert or make a mazda rx-8 or a posche cayenne.if anyone could convert this can u be sure to include a dash?oh and its for nfs 3 from any game and would anyone think its possible to see more common suv's in nfs3??

Travfrey 08-02-2004 11:31 AM

pics
 
Could someone make a 1976 gran torion(The Starsky and hutch car) for NFS3 (HP). It would be awesome if you made it superchaged, or even put a blower on it.

It'd be cool if it went 200+ MPH

Speed911 08-02-2004 02:48 PM

This is fake, right....?
 
Quote:

Originally Posted by .:360_Spyder:.
hopefully this isnt much work for any1

Actually, Converting NFS4-NFS6 is a whle lot of work. It averages (for Jay0 around 11 hours for 1 car :| .

Jimmy 08-02-2004 03:08 PM

Quote:

Originally Posted by Turbojett
this one's for Jay and/or DanR.

could you convert DanR's C6 (NFS6) to NFS4?
thanks.

http://www.nfscars.net/car.php?ID=5998 :wink:

radeonboy 08-06-2004 06:37 AM

not aplicable
 
Could someone plz make a Subaru Forester STi for Need For Speed High Stakes :mrgreen:

SLP Firehawk 08-06-2004 07:13 AM

How 'bout a car thats never been made on any nfs site ive seen.
The Ford PROBE :mrgreen: .

NJ (XJ220) 08-07-2004 11:50 AM

@ J Design: on http://jpracing.racerplanet.com (the site is down at the moment but will reopen soon, as far as I'm aware) there is a Ford Probe made by Alpha Red Fox, the newest model I think. It's in my opinion good quality and low poly.

Turbojett 08-09-2004 02:35 AM

Quote:

Originally Posted by JBM Tuner
Quote:

Originally Posted by Turbojett
this one's for Jay and/or DanR.

could you convert DanR's C6 (NFS6) to NFS4?
thanks.

http://www.nfscars.net/car.php?ID=5998 :wink:

Yeah I know, I should have specified which one, my bad. I was asking about the convertible.
Now I just have to find the readme from the C6 so I can E-mail Dan.

YB 08-09-2004 04:53 AM

Can anyone make an Ascari KZ1 for NFS 3?
It's a car that nobody has ever made or put on a site... :( :cry:

Here's some pics:

Pic 1 (rear+side)
Pic 2 (front+side)
Pic 3 (rear)
Pic 4 (front+side)
Pic 5 (interior)
Pic 6 (front+side+top)

I would really appreciate if someone would make that car.

Bye!!

NOTE: in the interior pic the steering wheel is not there, but i have a drawing of the interior WITH the steering wheel.

EthanGilles 08-09-2004 09:22 PM

Can someone have a few spare time and make a NFS HS version os this riced Twingo?

I like to call it Renault Twingo "Houdart" Edition

Here are some pics

Cheers

Simer 08-10-2004 08:02 PM

Ok lets try this again can someone please make me a Volvo 470 GL? Thanks :wink:

luke_t 08-13-2004 01:31 AM

Can someone make me a Mitsubishi Lancer- Top speed 240km/h. 300km/h with NOS

PM if u can

smith2609 08-13-2004 02:02 PM

This is a request for NFS3.

Could someone create an Aston DB9 and a Honda CR-V please :D

Thanks

MustangMan 08-15-2004 08:21 AM

Hey! Im new to NFSCars.com and I love NFS and I was wonderin If n e 1 is going to make a 1971-73 Mustang Mach 1 for Hot Pursuit 2. That would be sick to get that. I already have a '67 Cobra GT500 and a 1999 35th aniversary ed. Can sum1 make the Mach 1 and a possible 2004 Mustang?
Oh yea, Colors should be anything you want, but add a Silver NFS one with a black stripe down the hood and MACH 1 on the sides and back.

Thanx alot if you can!!

SLP Firehawk 08-15-2004 04:28 PM

Quote:

Originally Posted by NJ (XJ220)
@ J Design: on http://jpracing.racerplanet.com (the site is down at the moment but will reopen soon, as far as I'm aware) there is a Ford Probe made by Alpha Red Fox, the newest model I think. It's in my opinion good quality and low poly.

Thanks :) :super: , I got the file and from the site it looks good :mrgreen: .

Viper 08-15-2004 05:54 PM

Quote:

Originally Posted by MustangMan
Hey! Im new to NFSCars.com and I love NFS and I was wonderin If n e 1 is going to make a 1971-73 Mustang Mach 1 for Hot Pursuit 2. That would be sick to get that. I already have a '67 Cobra GT500 and a 1999 35th aniversary ed. Can sum1 make the Mach 1 and a possible 2004 Mustang?
Oh yea, Colors should be anything you want, but add a Silver NFS one with a black stripe down the hood and MACH 1 on the sides and back.

Thanx alot if you can!!

Hopefully some Ford Lover can make this car for you and me both :mrgreen: I LOVE, Love, Love Mach 1's !!! Can't get enough of them, new or old- I've been trying to get some guy sell me his 69' Grande AND a Mach 1 as well...they are both rusted-up but...oh, my eyes weep at the possibilities :cry:

Mad Dog Turahk 08-16-2004 05:56 PM

This is an alternate car request for NFS3.

If the other requests that I made earlier aren't going to work, I'd like to request some cars from Carmageddon TDR 2000. (it's not necessary to make all cars, 1 of 2 is enough, the choice to decide which car you create is yours :) )
I'd like to have the car(s) low poly, for I have a very slow pc...

-Knave (modified Knight Industries 2000)
-McKillem (modified McLaren F1)
-Eagle Mk. IV (Fantasy car)
-Gorvette (modified Chevrolet Corvette)

Other cars: (not necessary to make all)
A completely modified and spiffed up Lamborghini Murciélago. (low poly) (the creator can use his imagination for the looks :mrgreen: )
A totally tuned and spiffed up Ferrari 360 Modena. (low poly) (the creator can use his imagination for the looks :mrgreen: )
A completely changed Ferrari F50. (low poly) (the creator can use his imagination for the looks :mrgreen: )
A totally modified Lamborghini Diablo VT. (low poly) (the creator can use his imagination for the looks :mrgreen: )

The last 4 cars need to look a bit creepy and the performances need to be realistic, but for the rest, the choices are completely yours. :mrgreen:

If you are up for the challenge to make one or more cars from the list, please contact me here on NFSCars, at nfs-speedster@home.nl or at NFS_8472@hotmail.com
I thank you very much in advance!!!


With kind regards,
Mad Dog T.

GM Lover 08-16-2004 06:08 PM

August wallpaper
 
@ Mad Dog Turahk

http://www.nfscars.net/car.php?ID=5596

modified 360

Mad Dog Turahk 08-16-2004 06:18 PM

Quote:

Originally Posted by GM Lover
@ Mad Dog Turahk

http://www.nfscars.net/car.php?ID=5596

modified 360

Thanks GM Lover! I forgot to mention that this car was the reason to request a modded 360 Modena. I already downloaded the car... sorry for the misunderstanding.

MDT.

Turbojett 08-16-2004 11:27 PM

I too would like to have a '71 Mach 1.

also, if i can remember requests from the previous thread...

Aston Martin DB9
Cadillac XLR
Chevy SSR
Gallardo Sant'Agata Bolognese Police
a high-quality Ferrari 456M
Audi S4 Cabriolet
Bentley Continental GT
VW Golf R32
Caddy CTS-V (be sure to include the Black Flag sticker ;) )
Lancer Evo VIII
Subaru WRX STi
Corvette C6 Convertible
Bugatti Veyron
Noble M14
A one-off that doesn't even exist in the real world:
Ferrari 575M Barchetta
And one really old one:
1970 Chevrolet Chevelle SS454 Coupe (Malibu; I love the quad tails)

I will volunteer to draw up blueprints myself to anyone that wants them... :super:

(*Sigh* if only NFS cars were universal and worked in every game...)

el nino 08-17-2004 12:54 AM

who wants ta race me?!?!
 
i would like a FnF nissan skyline r32 with the decals on the side plz if thats not 2 much to ask lol :super:

el nino

Anonymous 08-18-2004 03:35 PM

I am aching to have a straight line 1/4 mile drag strip, with fully funtioning lights and timers, for NFS4

SLP Firehawk 08-18-2004 03:55 PM

This isnt totally to your specs, but its the best and only one out there :super: . http://jpracing.racerplanet.com/modu...ndex.php?id=23

It should be in the top row :) .

Zypher 08-20-2004 05:13 PM

Hello, I'm anew member and was just curious if anyone could do me a favor by making a car for me. I would do it myself, but I don't know how. So if any one could please create a Vector WX3 Avtech for NFS4, I would be eternally greatful. Thnanks for your time!

Specifications
Year 1992
Make Vector
Model WX3 Concept
Production 1

ENGINE

Type: Aluminum alloy 90-degree V-8. Displacement: 6.0 liters. Horsepower: 600+ @ 5700 RPM. Torque: 600+ ft./lbs. @ 4900 RPM. Block Construction: Blueprinted and balanced aluminum block with replaceable ductile iron cylinder liners, forged aluminum pistons, Carrillo rods, forged crankshaft. Cylinder Heads: aluminum, enlarged and polished ports, stainless steel valves, roller rocker arms. Cooling System: Water/ethylene glycol, forward high efficiency aluminum radiator, thermostatically controlled fan. Fuel System: electronic direct port fuel injection. ignition System: electronic, direct fire. Turbo-chargers:Two Garrett AiResearch H3's with water cooled housings. Intercooler: Air-to-air, dual pass high efficiency aluminum. Emission Control: Closed loop injection/catalytic converters, unleaded fuel

STEERING

Power assisted rack and pinion steering.

BRAKES

Competition racing brakes: Four-wheel ventilated discs, 13.0 in. diameter front, 13.0 in. diameter rear, four piston aluminum calipers, braided stainless steel fluid lines.

WHEELS / TIRES

Wheels Front/Rear: 3-piece modular, machined billet aluminum. 16 x 9.5 in./16 x 12.0 in. Tires Front/Rear: Michelin XGT + radial 255-45ZR16/315-40ZR16. Certified by Michelin for 200 + MPH sustained operation.

DIMENSIONS & CAPACITIES

Wheelbase: 103.0 in. Track Front/Rear: 63.0/65.0 in. Length: 172.0 in. Width: 76 in. Height: 42.5 in. Ground Clearance: 5.5 in. Oil Capacity: 12 qts. Water Capacity: 24.0 qts

DRIVETRAIN

Transmission: Aluminum high performance racingmanual/automatic, clutchless, ratchet shifter. Final Drive: Aluminum housing with ground helical spur gears, Gleason-Torsen~ differential. Ratio: 2.43:1.


BODY

Construction: Hybrid composite of carbon, Kevlar, and S-glass unidirectional fibers in epoxy resin matrix. Strong, light, dent-proof, corrosion-free. Same repair procedures as fiber-glass.


CHASSIS

Type: Semi-monocoque with full 4130 chrome moly tube steel roll cage. Construction: Structural steel tubing,aluminum monocoque structure, epoxy-bonded and riveted with aircraft fasteners, aluminum honeycomb panel reinforced. Corrosion resistant.

SUSPENSION

Front: Unequal length A-arms, concentric coil adjustable shock absorbers. Rear: DeDion tube with four-trailing arms and lateral link, concentric coil adjustable shock absorbers.

FEATURES
Power mirrors which fold into body, 2 aircraft-type speed brakes on rear wing.

Performance
Top Speed 402.3 kph / 250.0 mph
0 - 60 mph 3sec
0 - ¼ mile Not Available
0 - 100 mph Not Available

If anyone needs more pics, I can e-mail them.
(thanks for the note, KonArtis)


All times are GMT -6. The time now is 01:38 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.