View Single Post
Old 09-01-2006   #400
Rich P
el awesomo
 
Rich P's Avatar
 
Join Date: May 2005
Location: sudbury, ontario
Posts: 1,255
Default

well, yesterday i picked up a tranny for my car, 200$. then, that night i got my old man to ask about a dynasty thats been sitting next to his shop for a year belonging to a garage across the yard. the owner wasnt around but a worker said take what you want and ill let him know. i waited until today and asked the owner. while waitinbg we heard him talking on the phone about interbreeding and when he was done we asked. he didnt even kow he still had the car, and wasnt sure if he still did, we told him it was still there and he said take what you want from it. i needed a fender and trunk lid real bad, scott needed a fuel rail. we opened up the hood and i noticed it had no battery, so i couldnt pop the trunk, we took th hood off so i could get at the fender and i decided to keep the hood and put in in the truck. i gave up on the fender after a bit anbd took the battery from the truck and put it in the dynasty and popped the trunk. i took the trunk off and worked on the ehadlights and grille. i got all the lights off, headlights, taillights, and signals, tossed them all in the truck. then i worked at the inside of the car, took the dashboar. we took a break for lunch and came back. i started again on the fender, nothing but troble. theres very tight and awkward bolts between the door and i tore up my hands getting them. i also hacked up my hands getting the bolts under it. i took a break from that and worked on the alternator. that had to come, worth 300$. i went back the the fender, there was 4 bolts left in the front, one at the top of the nose panel, one at the bottom and 2 on th bumper. while i worked at that, scott was working on taking the rad, a 500$ value, he gave up. i cut the top bolt on the fender at the top of the nose panel and then pulled like hell and busted thge nose panel at the bottom of the signal light. then i got frustrated and pulled the nose panel all the way around and it popped off, which was really good because i really wanted that to hang on my wall. i cut the bumper and got the fender, it was cheapo rubber and just ripped the rest. and thats pretty much it for our 8 hour adventure, it was fun, painfull and tiring, but the amount of fun it was made up for the bad, plus my dad kept bringing us water and cookies. i kept asking if he should be inside workin. anyhoo, heres some pics

heres my buddy scott taking the intake manifold and fuel rail for his dynasty


this is the beginning of the build up of crap were taking, just the hood, trunk and some tires


theres scott, he got the intake off


heres me taking off the lights


me still working on that one light


the inside after ive been in it


i finally got that light off


the load of crap, so for we got all lights, hood, trunk, grille, trunk insides, all dash components and a few odds and ends


heres the car after we unloaded and got some lunch, i just got off the nose panel


the second load, a few junk things, speakers and the noise panel


scott trying to take the rad out


me after working forever on getting out the alternator


the dynasty just befroe i started working on the fender again,, so far we've only been working 3 hours, heres where the next 5 come in


me beating the jesus out of 2 bolts that just spin freely holding the fender on


me going hammer happy on the prybar trying to bust the bolts


heres the problem bolts, theres clips that allow the bolt to be undone, but they broked so they just spin.


me cutting the bumper


yeee!! fender off!


final look at the dynasty, we got our money worth, well, sorta, it was free
__________________
http://i25.photobucket.com/albums/c89/Richard3100/sig2-1.jpg

Last edited by Rich P; 02-05-2007 at 03:05 PM.
Rich P is offline   Reply With Quote